Trailer Nose Plate

Pre-drilled nose plate is designed to accept the standard 4-1/2" square bolt pattern found on most 4-bolt drawbars or lunette rings. Allows 3 mounting positions. 3/4 inch thick plate with (8) 21/32" holes. Holes are spaced 4-1/2" apart horizontally and vertically. Plate is 7" wide by 16" tall.

• Used for mounting 4-bolt lunette ring or flat mount coupler
• Provides 3 mounting positions
• 3/4 inch thick plate is 7 inch x 16 inch
• 4.5 inch hole centers vertically and horizontally
• Unpainted